Name: Hydraulic O Rings
Availability: instock

Hydraulic O Rings

O-rings are used to seal all kinds of devices to keep them operating and safe. They do so by keeping necessary fluids in hydraulic systems and unwanted fluids and contaminants out.

Send Message

Double Acting Hydraulic Cylinder

A double-acting hydraulic cylinder has a port at each end, supplied with hydraulic fluid for both the retraction and extension of the piston. A double-acting cylinder is used where an external force is not available to retract the piston or it can be used where high force is required in both directions of travel.

Send Message

Hydraulic Cylinders

Single Acting Hydraulic Cylinder

The working principle of single-acting cylinders are to transfer hydraulic fluids or an output force in one direction only. Within the cylinder, the piston rod can push outwards but cannot pull back, therefore requiring a force in the opposite direction to return the rod back to its original position.

Send Message

Hydraulic Valves

Flow Control Valve

The purpose of a flow control valve is to regulate the flow rate in a specific portion of a hydraulic circuit. In hydraulic systems, they’re used to control the flow rate to motors and cylinders, thereby regulating the speed of those components.

Send Message

Hydraulic Valves

Counter Balance Valves

Counterbalance valves are used in hydraulic systems working with an overriding (run-away) or suspended load. They are designed to create back pressure at the return line of the actuator to prevent losing control over the load.

Send Message

Hydraulic Valves

Pressure Reducing Valve

The purpose of pressure-reducing values is to keep the secondary pressures correct in branches of hydraulic systems. Most pressure-reducing valves are open and 2 way this allows the pressure to flow freely until they reach further downstream where there is a set pressure.

Send Message

Hydraulic Valves

Pressure Relief Valve

Pressure relief valves are used in hydraulic systems to limit the system pressure to a specific set level. If this set level is reached, the pressure relief valve responds and feeds the excess flow from the system back to the tank. Note: the pressure relief valve is a normally closed pressure control valve

Send Message

Hydraulic Valves

Poppet Valves

Poppet valves are used in hydraulic systems. They are commonly controlled through solenoids and can be set to be either normally-closed or normally-open in their de-energized states. They are also used as check valves to provide one-way flow and as relief valves to guard against over pressure.

Send Message

Hydraulic Seals

Hydraulic Seals Rod Seals / Piston Seals / Wiper Seals / Wear Ring

Hydraulic seals are gasket-like rings that are designed to seal areas between the components in a hydraulic cylinder. Hydraulic cylinders contain many different components, some of which are exposed to the fluid. To prevent fluid from leaking around these components, hydraulic seals are used. Hydraulic seals are designed to fit the components in a hydraulic cylinder while creating a leak-proof seal around them.