'water cooled hydraulic oil coolers'

A hydraulic cooler is a device designed to prevent oil used in hydraulic systems from overheating. This is a critical function in hydraulic systems, as overheating of the oil can lead to a drop in system efficiency and excessive wear of the system components in general due to reduced oil viscosity.

FAILED

A double-acting hydraulic cylinder has a port at each end, supplied with hydraulic fluid for both the retraction and extension of the piston. A double-acting cylinder is used where an external force is not available to retract the piston or it can be used where high force is required in both directions of travel.

FAILED

The working principle of single-acting cylinders are to transfer hydraulic fluids or an output force in one direction only. Within the cylinder, the piston rod can push outwards but cannot pull back, therefore requiring a force in the opposite direction to return the rod back to its original position.

FAILED

Allow hydraulic oil into different paths from one or more sources. Will usually consist of a spool inside a cylinder which is mechanically or electrically actuated. The position of the spool restricts or permits flow, thus it controls the fluid flow.

FAILED

O-rings are used to seal all kinds of devices to keep them operating and safe. They do so by keeping necessary fluids in hydraulic systems and unwanted fluids and contaminants out.

FAILED

Prefill valve is a drain valve which drains oil between the cylinder and tank. The prefill valve prevents the oil from flowing from the Hydraulic cylinder to the main tank while pressurizing inversely the hydraulic cylinder will make oil drain to the tank when reversion.

FAILED

A hydraulic solenoid valve is a solenoid-controlled directional valve used in a hydraulic system for opening & closing or changing the direction of flow of the liquid. The valve operates with a solenoid, which is an electric coil wound around a ferromagnetic core at its centre.

FAILED

Check valves are the simplest form of hydraulic devices in that they permit free oil flow in one direction and block oil flow in the opposite direction. Check valves may also be used as a directional or pressure control in a hydraulic system.

FAILED

Compact heavy-duty pumps designed for Industrial / Mobile applications like operating small presses, and fixtures, as well as providing source of oil for hydraulically operated emergency equipments.

FAILED