'working pressure'

A pressure switch is an instrument that automatically senses a change in pressure and opens or closes an electrical switching element, when a predetermined pressure point is reached. A pressure-sensing element is that part of a pressure switch that moves due to the change in pressure.

FAILED

Designed to control double pumps of a Hi-Low system. It unloads a low-pressure pump when system pressure rises above-set pressures and only high-pressure pump delivers the flow. Nominal flow and pressure ratings model max (Check Models).

FAILED

Counterbalance valves are used in hydraulic systems working with an overriding (run-away) or suspended load. They are designed to create back pressure at the return line of the actuator to prevent losing control over the load.

FAILED

sequence valves can be used to sense pressure (port 1) in one circuit and then open and supply oil to a secondary circuit (port 2) at a predetermined pressure. A typical application would be when maintained clamping pressure is required in the primary circuit while work is being performed in the secondary circuit.

FAILED

The purpose of pressure-reducing values is to keep the secondary pressures correct in branches of hydraulic systems. Most pressure-reducing valves are open and 2 way this allows the pressure to flow freely until they reach further downstream where there is a set pressure.

FAILED

Pressure relief valves are used in hydraulic systems to limit the system pressure to a specific set level. If this set level is reached, the pressure relief valve responds and feeds the excess flow from the system back to the tank. Note: the pressure relief valve is a normally closed pressure control valve

FAILED

A hydraulic tandem gear pump uses SP gears, with small fluctuation, high pressure, low noise and stable performance. A hydraulic tandem gear pump uses composite material bearings and high-performance sealing elements has a small starting torque and good tightness and can work efficiently under harsh working conditions.

FAILED

A pressure gauge is a device used to measure and visualize fluid intensity in a system. Pressure gauges are indispensable devices during the setup of a system and its operation. They ensure the system is within the correct operating conditions and that there are no leaks.

FAILED

Micro Hose Test Assemblies and Test Point fittings let you test systems at working pressures without tools and check for leaks in multiple spots. They are ideal for hydraulic oils and other mineral-based fluids used in off-road mobile equipment.

FAILED